Ceramic Tiles Adhesive HPMC replace as Thickening Agent

GDGEL-W RHEOLOGICAL ADDITIVE

Organophilic Clay Description：

GDGEL-W series is a special organic modified clay . It can be dispersed both in aqueous system and solvent system. Especially, It has excellent behavior in water-borne system. It can replace cellulose such as HEC and HPMC in water-borne coatings, construction mortar,ceramics.

Water Based Rheological Additives

Specification:

Note: Viscosity testing condition: water solution at 25℃,tested by Brookfield DV-Ⅱ VISCOMETER, Rotor Rotate speed RV7

Solvent Compatible Bentonite Application:

1.      Cement-based mortar

◆  GDGEL W has good thickening performance in mortar and can improve mortar’s rheology. With GDGEL W, mortar is more slippy and easier for workers to coat on wall. It can Prolong construction time of mortar, and create higher working efficiency. It is helpful for mortar to form high intension during solidification.

2.      Putty

◆  GDGELhas good water-retention performance in putty, and it can prevent putty to be dewatering and crack, and prolong construction time. GDGEL W has anti-skinning performance and is helpful for putty to have high intension during solidification.

3.  Thermal insulation mortar (mainly for Bonding mortar and overlay mortar)

◆  With its high water-retention thixotropy and adhesion, GDGEL W can prolong construction time of mortar and create higher working efficiency. It gives fine surface and slippery feeling of the mortar and improve surface quality by its shrinkability and anticracking. It is helpful for mortar to form high intension during solidification. and improve bond strength.

4.      Interface treatment binder

◆  GDGEL W is good thickening agent for interface treatment binder. It can increase tensile strength and anti-shear strength, and make the binder to have better adhesion and binding strength.

5. Ceramic tile

◆ GDGEL W can be used in ceramic tile as water retention agent,adhesive. With its perfect water retention and adhesion, ceramic tile can be strength enough to avoid crack and easier to be constructed.

6.      Emusion coatings and other water-borne paint.

◆  With its high thickening and thixotropy, it can be used to replace HEC in Emusion coatings and other water-borne paint as rheological additive, film-forming agent, adhesive, emulsifier and stabilizer. It also can be used together with HEC in a proper ratio.

7.      Printing and dyeing in textile.

◆  Used as adhesive

Rheology Modifiers Thickeners 

Package and Storage:

◆ Package: Craft paper bag with PE liner.  The weight of each package is 20kg or 25kg.

◆ Store condition: Keep it in Dry and sealed. places at the TEMP. of 0℃-30℃.

◆ Validity:12months from the date of manufacturing.

Company introduction:

GDNM combines knowledge and experience with the latest plant and technology. Established in 2008, as the up-rising star in the line of Modified Bentonite, we have the newest organophilic clay manufacturing facility anywhere in the world. GDNM`s manufacturing plant is built to the latest design and highest safety and production standards. And with our location near Shanghai Port means we can deliver quickly and cost-effectively anywhere in the world. GDNM is committed to environmentally friendly materials for Coating, Paint, Ink, Oil drilling mud, Lubricating Grease, mortar, putties, water treatment etc. industrial. So we centered on waterborne Rheological Additive, at the same time, we make high purity solvent-born Organoclay Rheological Additive which is no harmful to the environment. We believe that good quality and service make us to run faster and longer.

How to choose the suitable Organoclay for Solvent Based Paints/Coatings/Inks/Lubricant Grease?

The following 5 points can help us recommend the suitable grades.

1.      The solvent polarity (low, middle, high) and the percent of solvent composition they are using.

2.      Do they need to make pre-gel with addition of polar activator or add with dry powder.

  Our easy dispersing grade can be added directly, but some grades need to add polar activator and make gel.

3.      what’s resin system? The Bentonite should be used in unsaturated resin or epoxy resin system or the others?

4.      what is your purpose of organoclay when used in paint, ink, lubricant grease? Is it anti-sagging ability or anti-settling ability?

5.      Do they make finish or primer paint? Do they have the special requirement of transparency, color, matting capability etc.?

What the international grades you can replace?

Such as BENTONE 34, BENTONE 38, BENTONE 27, BENTONE SD1, BENTONE SD2, BENTONE EW, BENTONE LT, CLAYTONE 40, CLAYTONE HT, VOSCOGEL B3, VISCOGEL B4, VISCOGEL S4 etc.